User manual

6. FILE OPERATIONS
The Crumar Mojo Desktop supports any USB
flash drive formatted with the FAT32
filesystem. If you have bought a new drive, you
don't need to format it. If you are a Mac user
and need to format an existing drive, make
sure you're formatting it using the FAT32
filesystem. Every file function assumes that the
drive is connected to one of the two System
USB ports on the back of the instrument. If the
drive is not present, the display will pop up an
alert window.
Import Program. Use this function to import single Programs that were previously
exported either by this or another Crumar Mojo Desktop or by the VB3-II virtual
instrument. Make sure the files are on the drive and the drive is connected. After
tapping on this item, the drive is scanned for compatible files and a new list is
loaded. Scroll the list using the up and down arrows or the VALUE encoder, then tap
on the Program you wish to import or push the VALUE encoder. The program is
imported in a temporary memory location. You can audition and edit it, but it will be
lost if you switch to a new Program or import a new Program from disk, unless you
go to the WRITE page and store it into a memory location of your choice.
Export Program. Use this function to export the current Program. A new file will be
created on the connected drive with the same Program name. This file can be later
imported on this or on another Crumar Mojo Desktop or in the VB3-II virtual
instrument.
Import Bank. Use this function to import the whole Program Bank containing all 128
Programs. The process is similar to importing single Programs. The disk is scanned for
valid files, then a new list is loaded with the existing bank files that you can load.
Tapping on a bank will replace the entire bank with the new one.
Export Bank: Use this function to export the whole Program Bank to disk. The Bank is
always exported as a file named “MojoDesktop.VB3Bank”. If this file is already present
on disk, it will be overwritten.
Update Firmware. When a new firmware is
released, after you've downloaded the file and
copied to the USB drive, use this function to
perform the update. Follow the on screen
instructions after tapping on this item.
Factory reset. Tap on this item to restore the
entire Program Bank and all Global options to
factory conditions.
CRUMAR MOJO DESKTOP USER'S MANUAL - Page 12/20