User manual

19. THE USB PORTS
The Mojo 61 includes 2 Type-A “host” USB 2.0 ports. These
are mainly used for updating the software or for
accepting external accessories.
An interesting use for a USB system port is the possibility
to connect a “Class-compliant USB-MIDI device”, i.e. one of
the many MIDI devices that don't need special drivers
when they are connected to a conventional computer. The Mojo 61 will recognize
USB-MIDI devices and will use them along with any other MIDI equipment
connected to either one or both the classic MIDI inputs located on the rear panel.
This way you can connect up to 3 MIDI devices that send messages to the Mojo 61,
for example a keyboard, a pedalboard and a control surface.
Please avoid connecting unsupported devices to this port. Please note that this port can
supply a max of 250 mA of current. Don't use this port to charge mobile devices.
Original CRUMAR accessories that can be connected to the SYSTEM USB ports:
– Original USB Wi-Fi dongle for accessing the web-app editor
– Mojopedals 2018
– G.M.LAB D9U – d-i-y drawbar controller
– G.M.LAB D9X – d-i-y drawbar controller with extended features
– G.M.LAB MJU – d-i-y Midi Jack USB
An additional Type-B USB 2.0 port is present at the back side of the
Mojo 61 that provides Class-compliant USB-MIDI IN/OUT
connection to your computer. Use this port to connect the Mojo
61 to your computer software. No drivers are needed for Windows,
OS X and Linux. Use this port to connect the USB cable for USB
online editor.
CRUMAR MOJO 61 USER'S MANUAL - Page 29/33