Datasheet

Table 5: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
69 F Additional supported
15 F 0b 1 = CFast specification is supported
14 F 1b 1 = Deterministic read after trim is supported
13 F 0b 1 = Long physical sector alignment error reporting control is
supported
12 F 0b 1 = DEVICE CONFIGURATION IDENTIFY DMA and DEVICE
CONFIGURATION SET DMA are supported
11 F 0b 1 = READ BUFFER DMA is supported
10 F 0b 1 = WRITE BUFFER DMA is supported
9 F 0b 1 = SET MAX PASSWORD DMA and SET MAX UNLOCK DMA
are supported
8 F 0b 1 = DOWNLOAD MICROCODE DMA is supported
7 F 0b Reserved for IEEE-1667
6 F 0b 1 = Optional ATA device 28-bit commands are supported
5 F 0b 1 = Read zero after trim is supported
4–0 F 00000b Reserved
70 F 0000h Reserved
71 F 0000h 0000h
0000h 0000h
Reserved for the IDENTIFY PACKET DEVICE command
75 Queue depth
15–5 F 00000000000b Reserved
4–0 F 11111b Maximum queue depth - 1
76 Serial ATA capabilities
15–13 F 000b Reserved
12 F 1b Native command queuing priority information is supported
11 F 0b Unload while NCQ commands are outstanding is supported
10 F 1b Physical event counters are supported
9 F 1b Receipt of host-initiated interface power management re-
quests is supported
8 F 1b Native command queuing is supported
7–4 F 0000b Reserved for future Serial ATA signaling speed grades
3 F 1b 1 = Serial ATA Gen-3 speed (6.0 Gb/s) is supported
2 F 1b 1 = Serial ATA Gen-2 speed (3.0 Gb/s) is supported
1 F 1b 1 = Serial ATA Gen-1 speed (1.5 Gb/s) is supported
0 F 0b Reserved (set to 0)
P400m 2.5-Inch NAND Flash SSD
Device ID
PDF: 09005aef84952553
p400m_2_5.pdf - Rev. G 5/13 EN
9
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.