Datasheet

Electrical Characteristics

Stresses greater than those listed may cause permanent damage to the device. This is a

stress rating only, and functional operation of the device at these or any other condi-

tions above those indicated in the operational sections of this specification is not im-

plied. Exposure to absolute maximum rating conditions for extended periods may affect

reliability.

Table 11: SATA Power Consumption

Density Idle Average Sequential Write/Read Max (128KB transfer)

100GB 170mW 5.3W <5.3W

200GB 170mW 9W <9W

400GB 170mW 10W <10W

Notes:

1. Data taken at 25°C using a 6 Gb/s SATA interface.

2. Sequential power measured in IOMETER MAX with 128KB transfer size.

Table 12: Maximum Ratings

Parameter/Condition Symbol Min Max Unit

Voltage input V5 4.5 5.5 V

Operating temperature T

0 70 °C

Non-operating temperature – –40 85 °C

Rate of temperature change – – 20 °C/hour

Relative humidity (non-condensing) – 5 95 %

Table 13: Shock and Vibration

Parameter/Condition Specification

Operating shock 1,000G/0.5ms

Operating vibration 2–500Hz at 3.1G

P400m 2.5-Inch NAND Flash SSD

Electrical Characteristics

PDF: 09005aef84952553

p400m_2_5.pdf - Rev. G 5/13 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.