manual

Product Description
The DataPort 10 comes with the installation documentation
you need for easy installation. The all metal enclosure is
sturdy and rugged to protect your data in all but the most
extreme environments. This product is designed for systems
that optimize space reserved for 5.25” bay devices.
The overall dimensions for the DataPort 10 are:
37.2mm/1.46” H x 145.5mm/5.73” W x 200mm/7.87” L.
The DataPort 10 consists of a frame and carrier with a top
cover. The frame can be fitted into any standard 5.25” half-
height drive bay.
DataPorts allow you to easily remove a 3.5” SATA hard drive
from your PC or MAC. The DataPort carrier provides a simple
and inexpensive way to swap drives, transport data between
computers, and is also useful for on-line back-up and storage
of critical files.
The DataPort 10 provides a switched power service to the
hard disk drive for 12V, 5V and 3.3V when connected in a
system that provides power thorough the 15 pin Serial ATA
conforming power connector.
Package Contents
The DataPort kit includes all of the necessary hardware to
install a 3.5” hard drive in a DataPort 10 and the DataPort
10 in a 5.25” drive bay. Before installing, please verify that
the following items have been included in the package.
Quantity Description
1 DataPort frame assembly
1 DataPort carrier assembly
1 Metal cover
1 Nylon screw for carrier cover (extra)
5 #6-32 x 1/4 flat head screws for drive
mounting
4 M3 x 5 pan head screws for frame
installation
2 Keys for lock
Page 1
Page 2