DataPort™ 250 USB 2.0 Enclosure User’s Guide WWW.CRU-DATAPORT.
TABLE OF CONTENTS Package Contents Features and Requirements Installation Trouble Shooting Technical Support Warranty P AGE 1 2 4 13 14 15 DataPort™ 250 USB 2.0 Enclosure User’s Guide WWW.CRU-DATAPORT.COM • (800) 260-9800 WWW.CRU-DATAPORT.
PACKAGE CONTENTS · · · · · · DataPort 250 Power Supply Power Cable for PS/2 Port USB cable Carrying Case User’s Manual If you are missing any of the above items please contact the place of purchase to get replacements. For further assistance, contact CRU-DataPort at 800-260-9800. WWW.CRU-DATAPORT.COM • (800) 260-9800 WWW.CRU-DATAPORT.
DataPort™ 250 FEATURES AND · · · · · · · · REQUIREMENTS USB 2.0 supports transfer rates up to 480 Mb/sec Enables the addition of a 2.5 IDE hard drive up to 9.5mm thickness USB 2.0 is backwards compatible with USB 1.
INSTALLING THE HARD DISK DRIVE (DP250) 1. 2. 3. 4. Leverage the side of the enclosure open with a small screwdriver. Slide the hard drive onto the connector. Close the enclosure by connecting one side then clipping in the other. Connect the provided USB cable between your computer’s USB port and the DP250 enclosure. 5.
Setting up the Drive for Windows 98 & Windows ME WARNING: Formatting your drive will result in loss of data. To install a drive on your computer for Windows 98 via the USB port you must download the drivers from CRU’s website (www.CRUDataPort.com). On the left side of the page you will see a link titled Support. Click on Support, then USB Drivers, and select the Windows 98SE USB drivers link. Download the Win98 file and follow the instructions on the website to install it.
Setting up the Drive for Windows 2000 WARNING: Formatting your drive will result in loss of data. Connect the DataPort™250 to your computer. A new window will pop up for the New Hardware Wizard (see Diagram 4). Follow the instructions to add the new drive. After completing these instructions, do the following: · · · · · Right click on My Computer Click on Manage In the Storage sub-section, click on Disk Management to display a list of all the drives connected to your computer.
Setting Up the Drive for Macs WARNING: Formatting your drive will result in loss of data. After connecting the DataPort™ 250 to your Mac, a new disk should be added to your desktop. If the drive is not correctly formatted you will be asked to initialize it (see Diagram 6). Click on the partition tab and set your desired partitions, then click ok (see Diagram 7). The new disk will be added to your desktop. REMEMBER, formatting your drive will result in loss of data. Diagram 7 Diagram 6 10 WWW.
Removing the Hard Disk Drive Win 98SE, ME, 2K and XP · Right click on the green arrow icon on the system tray · Select Remove/Reject · Highlight the USB Mass Storage Device in the dialog box then click on Stop. · Choose the external disk drive that you want to disconnect, then click on Stop. · Wait until the “You may safely remove this device” message appears. · Unplug the cable from the computer.
TECHNICAL SUPPORT Contact your dealer for technical support first. If you still need assistance, then contact the CRU-DataPort technical support department. You can contact CRU-DataPort’s technical support department by visiting our web site at URL http://www.CRU-DataPort.com or sending an E-mail message to support@CRU-DataPort.com. Technical support is also available by phone at: (800) 260-9800 during the hours of: 8:00 AM to 5:00 PM, PST Monday through Friday, or by FAX (360)896-1017.
Limitation of Liability: The warranties set forth in this agreement replace all other warranties. CRU-DataPort expressly disclaims all other warranties, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose and noninfringement of third-party rights with respect to the documentation and hardware. No CRU-DataPort dealer, agent or employee is authorized to make any modification, extension, or addition to this warranty.
Advance Replacement: Advance Replacement requests require an Advance Replacement Authorization, pre-approved by a CRU-DataPort Technical Support Specialist. Advance Replacements also require a credit card to secure the product being replaced. Advance replacements will typically ship within one day of RMA issue date and authorization. CRU-DataPort will pay outbound freight and insurance only.
