USER’S MANUAL Downloaded from www.cbradio.
SYMBOLS DESCRIPTION Please carefully read the instructions Information on recycling, not throwing your material in the trash at the end of life, Bring it to special aera to be recycling DC using Keep dry Shield symbol CE conformity symbol Alert symbol indicating an incomplete harmonization of the frequency band which will result in restrictions on the use of the equipment concerned.
This transceiver corresponds to the requirements of European directives R&TTE and answers the European standards of telecommunication EN 60950-1, EN 301 489-1/-15 et EN 301 783-1/-2. IMPORTANT : This receiving transmitter works on not free frequencies in the use. The user has to possess a radio license amateur radio (certificate of radio operator HAM) to use it (in emission) and only on the frequencies authorized in radio amateurs.
Avoid exposing the transceiver to temperatures below -30 ° C. and above +60 ° C, the temperature of the dashboard inside a vehicle can sometimes exceed 80 ° C, which can damage irreparable damage to your machine in case of prolonged exposure. Not exposed to prolonged direct sunlight or place it near heaters. Do not place anything on top of the apparatus that would interfere with cooling Check that your battery is sufficiently charged to avoid rapidly exhausting its resources.
WELCOME TO USE Welcome to the world of new CB radios. The new SS 6900 Radio provides you with top performance and best visual enjoyment. With the use of SMT technology to guarantee the best stability, reliability and unprecedented quality, your multi-functional SS 6900 Radio 10-meter Radio is a new step in personal communication and is surely the best choice for professional users of CB radios.
CONTENTS FUNCTIONS & FEATURES ...............................................................................................................................................................1 WARNING ..........................................................................................................................................................................................1 RESET FUNCTION (Resume Factory Default) .....................................................................................
FUNCTIONS & FEATURES Big LCD which displays frequency and all kinds of information DUAL-DIGITAL TUBE FOR CHANNEL DISPLAY USE EL technology for backlight PA、CW、AM、FM、USB、LSB mode A、B、C、D、E、F , 6 bands in total, with 60 channels at most in each band to be programmed. 61 Frequency Tuning Step can be 10HZ, 100HZ, 1KHZ or 10KHZ.
INSTALLLATON 11 WHERE AND HOW TO MOUNT YOUR MOBILE CB RADIO a)You should choose the most appropriate setting from a simple and practical point of view. b)Your CB radio should not interfere with the driver or the passengers. c) Remember to provide different wires for passing and protection. (e.g.: power, antenna, accessory cabling) so that they do not in any way interfere with the driving of vehicles.
31 POWER CONNECTION Your RADIO is protected against an inversion of polarities. However, before switching it on, you are advised to check all the connections. Your equipment must be supplied with a continued current of 12 volts (A). Today, most cars and lorries are negative earth. You can check this by making sure that the negative terminal of the battery is connected either to the engine block or to the chassis. If this is not the case, you should consult your dealer.
as close as possible to 1.( An SWR reading between 1 and 1.8 is acceptable). -It will be necessary to re-calibrate the SWR meter after each adjustment of the antenna. 61 -Set HOW INTERNAL SWRinMETER CBTO to USE channel 20@D band FM. -Set CB to channel 20@D band in FM. TX -Press <> button on the microphone to transmit. -Press button on the microphone to transmit. -At the <> moment, LCD would display SWR value which should be as close as possible 1.
it is desired that the control be adjusted only to the point where the receiver background noise or ambient background noise is eliminated. Turn fully anticlockwise then slowly clockwise until the receiver noise disappears. Any signal to be received must now be slightly stronger than the average received noise. Further clockwise rotation will increase the threshold level which a signal must overcome in order to be heard. Only strong signals will be heard at a maximum clockwise setting.
FUNC key, and then press other keys to realize the second functions silk-screened under the button. "FUNC+ Keypad name" is to be used in the following operating instruction. 161 ROGER BEEP OR BEEP FUNCTION (1)RB Press "RB" key to enable "ROGER BEEP" function with "RB" icon appearing on LCD display. Press the key repeatedly to switch on/off the function. When RB function is enabled, the radio will automatically transmit the audio signal at the end of your transmission.
channel. You can receive the calling, and also, can transmit on this channel by pressing PTT key. If there is no transmission or detected signal on that channel within 5 seconds(time to resume scanning can be programmed by PC software), radio will start scanning again. To exit the SCAN function, press the SCAN key or the PTT key. The Scan Type above is the SQ mode under SCA Selection in Function Menu.
241 EXT SP or PA SP EXT SP Accept 4 to 8 ohm, 4 watt external speaker to be connected. When external speaker is connected to this jack, the built-in speaker is automatically disconnected. PA SP It is used to connect a PA speaker. Before operating PA, you must firstly connect a PA speaker to this jack. 251 ATTENNA Accept 50 ohm coaxial cable with a type PL-259 plug to be connected.
(1) STP (Frequency Tuning Step) This menu is to set tuning step when adjusting frequency by CLARIFIER knob Options: 10HZ、100HZ、1KHZ、10KHZ Default: 10HZ (2) CLA (CLARIFIER knob functions setting) 9 This menu is to set functions turned by CLARIFIER knob. Options are as follows: FIN: Fine regulation. When this option is selected, users can fine tuning the receiving frequency by rotating the CLARIFIER knob.
(6) SC Scanning Type Selection This menu is to set Scan Type. Options are as follows: SQ: When SQ is selected, scan would stop when a valid signal is detected. The radio would resume scanning after signal disappears for 5s. TI: When TI is selected, scan would stop when a valid signal is detected. The radio would resume scanning 5 seconds later, whether signal disappears or not. Default: SQ This menu is to choose whether to enable Power supplied Voltage Protection function or not.
This menu is to select frequency of Roger Beep. The frequency range is 300KHZ—3KHZ. The shift step is 10HZ. Default: 1050HZ (11) RBT (ROGER BEEP Holding Time) This menu is to select Roger Beep Holding Time from 50ms—1000ms. The shift step is 50ms. Default: 500ms (12) CFR (CW Side Tone Frequency) 11 This menu is to select CW Side Tone Frequency from 300HZ-3KHZ, the shift step is 10HZ.
SPECIFICATIONS General Frequency Range Frequency Band Channel Frequency Control Frequency Step Frequency Tolerance Frequency Stability Temperature Range Microphone Input Voltage Size Weight Antenna Connector 28.000 29.700 25.615MHZ—30.105MHZ (Programmable) A/B/C/D/E/F 60 channels (programmable) in each band Phase-Locked-Loop Synthesizer 10Hz 100Hz 1KHz 10KHz 0.005% 0.001% -30℃to +50℃ Plug-in dynamic; with push-to-talk /UP/DN/ ASQ switch and coiled cord DC 13.8V normal, 15.9V max; 11.
DECLARATION OF CONFORMITY We hereby declare under our responsability that the product : Description : mobile transceiver HF amateur radio Brand : CRT Model : SS 6900 E C N satisfies all the technical regulations applicable to the product within the scope of directive R .
