Installation Guide

Instruction for Mirror Fixing
1. Select the position for the mirror and fix the wall fixing brackets in place
referring to both the dimensions shown in Fig 1 and the instructions for
double mounted fixing.
Fig.1 Fig.2
2. It is important to ensure the wall fixing brackets are fitted horizontally
on a flat surface. Failure to do this may result in glass breakage.
3. Loosen the plastic grub screws on the reverse of each backplate and
carefully slide the mirror glass into the mirror securing slot. Please
ensure that the backplates are positioned on the horizontal centreline
of the mirror glass as shown in Fig.3.
4. Secure the mirror glass in position by tightening the grub screw.
DO NOT OVERTIGHTEN.
5. Using a small flat head screwdriver loosen the grub screw within the
backplate. Place the backplate on the wall bracket and tighten the grub
screw as shown in figure 2.
Product Care Advice
Fig.3 Fig.4
• To retain the best quality finish, clean product regularly with a soft damp cloth.
• Do not use abrasive or chemical cleaners, as these will damage the product.
• Do not place hot objects onto the surface of the glass.
• Do not position glass components in close contact with a heat source
Croydex Limited, Central Way, Andover, Hants, SP10 5AW, UK
Tel: [phone].
Fax: [phone]
Website: www.croydex.co.uk
. E-mail: [e-mail]
WMA 033 R01