Installation Guide

Remove old wall plate.
(PLATE SHOWN FOR REF ONLY)
FLEXI FIX WALL PLATE WILL FIT
EXISTING HOLE CENTRES OF -
MAX - 34mm apart
MIN - 15mm apart
CENTRES
Secure product to Flexi Fix wall plate
by tightening the grub screw
underneath.
MAX CENTRES
MAX CENTRES
Max Towel Rail Adjustment
Max Shelf Adjustment
i
Fitting Instructions for Flexi-Fix Wall Mounted Accessories
CAUTION!
When using existing holes DO NOT EXCEED the
maximum bracket centre dimensions printed on
the back of the shelf and towel rail packs.
In some instances existing hole centres may be
too far apart and not allow the brackets to be
positioned as desired. In such instances please
refer to the following instructions to drill new holes
or use the adhesive fixing method.
CAUTION!
SLIDE BRACKETS CAREFULLY
TO AVOID SCRATCHING
DO NOT OVERTIGHTEN
Please refer to the following pages for fitting instructions when drilling
new holes or using the adhesive fixing method.
i
CAUTION!
ENSURE HOLES
IN THE WALL
ARE SUITABLE
FOR RE-USE
IT MAY BE
NECESSARY TO
DRILL NEW
HOLES
A
WHEN USING EXISTING HOLES
WMA 058 R05