Installation Guide

AD116441 LUXURY SQUARE SHOWER CURTAIN ROD
Fitting Instructions
• Fixing Pack Contents
Fixing screw x 4
Wall plug x 4
Hex head key x 2 (small & large)
Spare grub screw x 2
• Pack Contents
Wall bracket x 2
Wall bracket cover x 2
Hooks x 12
Straight Joint x 1
Wall bracket Wall bracket cover
Collar x 2
1.25m Rod x 2
• Tools Required
Drill Hooks
6mm masonry drill bit
6mm ceramic drill bit (optional)
Screwdriver
Pencil
Spirit level
Small hack saw Straight Joint Collar
Hex head keys (included in fixing pack)
Keep DIY tools out of the reach of children Rod
Home Safety Advice
Before drilling, check for hidden cables and pipework. If you are using an electric drill, take
extreme care of any surplus water in the vicinity of the working area. It is advisable to use a
residual current circuit breaker (RCCB). Always take care and use eye protection.
On tiled walls always use a ceramic drill bit and ensure that the drill hole passes through the
central tiled area. To prevent surface damage to the tile from drill slippage, mask the area around
the hole with tape before drilling.
Do not use this product as a grab bar.
We recommend that two people fit this product to ensure that it is fitted safely.

Summary of content (2 pages)