Setup guide

Network
Configuration
QMS CrownNet Setup Guide56
4 If appropriate, fill in the Description, Queue Driver, Priority,
and Scheduling boxes.
» Note:
Separator pages are not currently supported.
5 Select the printer name you identified in the previous section
from the list of Printers.
This name will be displayed in the box titled Select the Printer to
be Used by This Queue.
6 Choose Add... to return to the Queue dialog box.
» Note:
If you’re working with an existing queue, choose Change.
7 In the Queue dialog box choose OK to return to the Print
Manager window.
8 Skip to “Print Queue Sharing” on page 57.
OS/2 Version 2.x and OS/2 Warp NetWork
Configuration
» Note: This is the standard method of installing a printer in OS/2
version 2.x and OS/2 Warp.
1 With OS/2 running, double-click the Templates folder.
2 Hold down the right mouse button and drag the Network
Printer icon out to the Workplace Shell (or into a folder).
3 Type a name in the Printer Name field.
4 Select a printer driver from the Default Printer Driver list.
5 Select a pipe name from the Output Port list.
Pipe names have the form \PIPE\QMS_
name where name is the
printer’s default hardware address or the printer name set in
“Interface Configuration” on page 32. If a QMS pipe is not
available, make sure you have installed the CrownAdmin 2 for
OS/2.
6 Choose Create to confirm the new printer definition.
7 Go to the following section, “Print Queue Sharing.”