Setup guide

Network
Configuration
55
QMS CrownNet Setup Guide
» Note:
If you’re working with an existing printer, select the printer
name and choose Change.
The Add Printer (or Change Printer) dialog box appears.
3 In the Name field, type the printer name (only if you are add-
ing a printer).
The printer name is local to the workstation and is used to
associate queues with physical printers. It can be the same as
the name used at the printer.
4 In the Device box, select the printer’s pipe name.
Pipe names have the form \PIPE\QMS_
name where name is the
printer’s default hardware address or the printer name set in the
“Interface Configuration” on page 32.
5 Select IBMNULL as the printer driver.
6 If appropriate, fill in the Description and Printer Timeout
Transmission Retry boxes.
7 Choose Add... to return to the Printers dialog box.
» Note:
If you’re working with an existing printer, choose Change.
8 In the Printers dialog box, choose OK to return to the Print
Manager.
Add a Print Queue
1 With the Print Manager still open, from the Setup menu
choose Queues...
2 In the Queues dialog box, choose Add...
» Note:
If you’re working with an existing queue, select the queue
to be changed and then choose Change.
The Add Queue (or Change Queue) dialog box appears.
3 In the Name field type a name for the queue (only if adding a
queue).
This is the name available to workstations on the network. It can
be the same as the name set for the printer.