Setup guide

Network
Configuration
QMS CrownNet Setup Guide54
26 Click the Add button.
27 Select the printer you named in the previous steps. Change
the context if needed.
28 Select OK.
29 Select OK.
» Note:
Additional properties, such as users and operators, can
also be assigned during initial installation or at a later time.
30 If the CrownNet Interface Card has already been configured,
the print server should now log into the file server.
The setup is now complete.
OS/2 LAN Manager/LAN Server Network
Configuration
1 With the CrownNet Manager for OS/2 installed and running,
add the printer by clicking the Install entry on the action bar.
The printer appears in the list displayed on the screen (for
example, QMS_080086000001).
2 Use the appropriate section below to create a print queue
and assign it to the printer.
OS/2 Version 1.x Network Configuration
If you’re using OS/2 version 2. x , skip to “OS/2 Version 2.x and OS/2
Warp NetWork Configuration” on page 56.
» Note:
This is the standard method of adding a printer in OS/2
version 1.x. The procedure is repeated here for your convenience.
Add a Printer
1 With the Print Manager open, from the Setup menu choose
Printers...
2 In the Printers dialog box, choose Add...