Setup guide

Software
Installation
QMS CrownNet Setup Guide22
to force installation of the upgraded software.
The installation program creates and installs the software in a
directory named
y :\CROWN. CrownNet Manager stores
important events in a log file, also in this directory.
» Note:
See the main readme file on the CD-ROM for the exact
location of this file.
5 To start the CrownNet Manager for OS/2 automatically each
time the print server is turned on, add the following com-
mands, in this order, at the end of the STARTUP.CMD file (but
before any @EXIT command):
set crownman=c:\crown↵
start c:\crown\crownman.exe -m↵
» Note:
The -m option minimizes the CrownNet Manager window to
an icon after the program opens.
6 To start the CrownNet Manager now, open an OS/2 window
and type the following commands:
set crownman=c:\crown↵
start c:\crown\crownman.exe↵
The CrownNet Manager window appears.
7 To install specific ports, choose Install from the CrownNet
Manager window.
8 In the Installation of CrownNet Ports dialog box, select the
appropriate printer port(s) and choose Install.
The selected ports are displayed in the CrownNet Manager
window.
» Note:
Port names are either the default or those chosen in
“Interface Configuration” on page 32.
Installing CrownAdmin 3 for OS/2
CrownAdmin 3 for OS/2 is a software utility that allows you to monitor
and configure QMS printers and perform network operations on print-
ers connected to your network.