Setup guide

Software
Installation
21
QMS CrownNet Setup Guide
2 If necessary, double-click the CD-ROM icon to display the
CD-ROM contents.
3 Double-click the MAC folder icon to display the folder con-
tents.
» Note:
See the main readme file on the CD-ROM for the exact
location of this folder.
4 Double-click the CRNADM folder icon to display the folder
contents.
5 Double-click the install or setup file to install CrownAdmin 3.
6 Go to “Interface Configuration” on page 32.
Installing CrownNet Manager for OS/2
» Note: For information on bypassing the print server and printing
directly to the printer, see the QMS CrownNet System Administrator’s
Guide.
OS/2 Print Server
1 At the OS/2 LAN Manager/LAN Server print server, log into
the network as the system administrator.
2 Insert the CD-ROM in the CD-ROM drive.
3 Open an OS/2 window.
4 At the DOS prompt, enter the path and filename for Crown-
Net Manager installer and the destination.
For example:
x :\platform\os2\cnetmgr\lsminst x : y :↵
where
x is the drive in which you inserted the CD-ROM, and y is
the drive on which CrownNet Manager will be installed.
» Note:
If you’ve previously installed the CrownNet Manager, you
can use
x
:\platform\os2\cnetmgr\lsminst x : y : /u↵