Setup guide

Software
Installation
17
QMS CrownNet Setup Guide
Software Installation*
Installing CrownAdmin 3 for AIX
CrownAdmin 3 for AIX is a software utility that allows you to monitor
and configure QMS printers and perform network operations on print-
ers connected to your network..
1 Insert the CD-ROM in the CD-ROM drive.
» Note:
Some CD-ROM drives require that the disk be placed in a
caddy before being inserted in the drive. Check your CD-ROM
documentation for information.
2 Logon the UNIX system as root.
3 Go to the root directory by typing
cd /↵
4 If you don't already have a CD-ROM mountpoint, create a
root-level directory by typing
mkdir /cdrom↵
5 Mount the CD-ROM file system by typing
mount -o ro -v cdrfs
device_filename /cdrom↵
where
device_filename is the complete pathname of the device
file associated with the CD-ROM drive. If you’re not sure of the
pathname, check your AIX documentation.
6 Verify that the CD-ROM file system has been mounted by list-
ing the contents of the directory:
ls /cdrom↵
The directory contains several subdirectories, including unix.
*These instructions are also provided in readme files in the appropriate directories on the
CD-ROM.