Setup guide

Setting up the
CrownNet
Interface
Overview
11
QMS CrownNet Setup Guide
4 Configure the CrownNet interface.
5 Configure the network.
If you use... Follow these instructions...
EtherTalk “EtherTalk Interface Configuration” on page 33.
Microsoft
Windows
Network
“CrownNet Print Utility for Windows Configuration”
on page 39.
NetWare “NetWare Interface Configuration (Netware 3.x)” on
page 34 or “NetWare Interface Configuration
(Netware 4.x)” on page 37
OS/2 LAN
Manager/LAN
Server
“OS/2 LAN Manager/LAN Server and Microsoft
Windows Network Interface Configuration” on
page 33.
TCP/IP “TCP/IP Interface Configuration” on page 38.
If you use... Follow these instructions...
EtherTalk “CrownNet Print Utility for Windows Configuration”
on page 39.
Microsoft
Network Interface
“CrownNet Print Utility for Windows Configuration”
on page 39
NetWare “NetWare 3.x Network Configuration (Using
CrownAdmin 3)” on page 46 or “NetWare 3.x
Network Configuration (Using PCONSOLE)” on
page 49.
“NetWare 4.x Network Configuration (Using
PCONSOLE)” on page 50 or “NetWare 4.x Network
Configuration (Using NWAdmin)” on page 52
OS/2 LAN
Manager/LAN
Server
“OS/2 LAN Manager/LAN Server Network
Configuration” on page 54
TCP/IP “TCP/IP NetWork Configuration” on page 57.