Specifications
())
Select collation in the driver or PPD.
On a network, use CrownAdmin to select collation.
Using CrownView via the CrownView operator control screen.
Configure the printer through the configuration menu.
.(
.'
For a multiple copy document with collation On, there must be enough display list
memory to hold the display list blocks for all pages in the collation range. (For more
information on Display List blocks, see “Display List” in chapter 5, “Additional Technical
Information,” in the
Reference
manual.) If there’s not enough memory, then a collation
boundary is forced after the last compiled page of the collation range.
.&.""
This mechanism of introducing a forced boundary—or breaking a document down into
several smaller, more manageable sets—is known as chunk collation. For example, in
the following illustration, copies “a” and “b” of each set must be manually combined to
create one collated document. The order of printing is copy 1(a), copy 2(a), copy 3(a),
copy 4(a), copy 1(b), copy 2(b), copy 3(b), and copy 4(b).
Menu
Operator Control/Collation
Choices
On, Off
Default
Off