Specifications

5)#%(6)
(

2 If it’s not already open, open the
printer’s front cover.
Squeeze the latch near the upper-right
corner of the cover.
»Note:
The illustrations for steps 2
through 8 show the printer without the
duplexer. However, the instructions are
the same for all models.
 Caution: This is necessary as it pulls the toner cartridges forward slightly to
make room for the OPC belt cartridge. You could damage the OPC belt if you
don’t do this.
3 Pull the latch to release the top
cover, and then open the printer’s
top cover.
4 Rotate up the two green lock levers
(one on each side of the OPC belt
cartridge opening) to prepare the
opening for the cartridge.
