Specifications

4*#'#
%

 !"#
1 In the printer driver (Paper tab, Media Type option), select Thick Stock.
2 On the control panel, press the Media key to select printing on thick stock.
3 Place the envelopes on a flat surface, and flatten them by pressing down the
corners.
4 Flex the envelope stack (including the edges) to remove any stiffness.
5 Correct any dog-eared corners, and then
tap the envelopes on a flat surface to align
them.
6 Remove the media cassette from the printer (and remove any media in the
cassette).
7 Adjust the media guides to the length and width of the envelopes.
Squeeze the retainers at the ends of the left width guide and/or the length guide,
move the guide to the appropriate location (media sizes are listed on the cas-
sette), and release the retainers.
»Note:
Make sure the guides are snug enough to keep the envelopes straight, but
not so tight that they buckle the envelopes.