Specifications

4*#'#
%

 Caution: For media other than standard plain paper or transparencies, both the driver
(Paper tab, Media Type option) and the Media key on the Control Panel (for the Print
Mode) need to be selected to tell the printer that thick stock is loaded. It is important to
use the Media key to set the tray to the appropriate print mode in order to obtain
optimum printing results and to enable the toner to adhere better. It is also important
to reset the Media key and the printer driver when you are switching back to plain
paper or transparencies.
 
At the printer, configure the inputbin (cassette) for the appropriate print mode.
For example for envelopes, the settings would be as follows:
Printer Driver Printer
Media Type: Thick Stock Inputbin: Media for Upper Bin
Print Mode: For Upper Bin*Automatic
1 Press the Media key on the control panel.
The printer goes off line, and the message window displays the inputbin message
MEDIA or MEDIA
FOR UPPER BIN FOR OPTIONAL BIN
Press the Next key (
)
if you need to change the specified inputbin.
2 Press the Select key ( ) when the message window displays the
inputbin you want.
The message window then displays the print mode message
FOR UPPER BIN or FOR UPPER BIN
*AUTOMATIC THICK STOCK
»Note:
The asterisk denotes the default setting.
Press the Next key if you need to change the print mode.