Specifications

%&)2*

To allocate the correct amount of memory, use the Memory/Quick Config menu to
choose the correct resolution and paper size for your printing. See chapter 4,
“Printer Configuration,” in the
Reference manual for more information.
5
If a blank startup page ejects or blank pages come out during a printing job, try the fol-
lowing:
1 Check the toner cartridges.
The image does not print if the cartridges are empty.
2 If the toner cartridges are not empty and blank pages are ejecting, take each
cartridge out, rock it from side to side, and reinstall it in the printer.
3 If these solutions do not work, contact your QMS vendor to purchase
another toner cartridge.
*
If the printer stops printing in the middle of your file, try the following:
1 Check your cable.
You could have the wrong kind of cable, or your printer may not be configured for
the correct cable and port.
2 Make sure no one pressed the Cancel key while your job was printing.
3 Check the message window to see if the cassette you are using is out of
media.

After 200 1-sided (or 100 2-sided) pages of a continuous print run of plain paper, the
magicolor 2+ automatically pauses for 3 minutes to cool down the engine. This occurs
for monochrome or color printing. Your control panel will display the message
COOLDOWN.
After this initial cooldown pause, the printer automatically resumes its printing. From
that point forward while doing continuous printing, the 3-minute cooldown pause
occurs every 50 pages until the continuous printing stops.