Specifications

'*%(%
(22
'&)*#%%&)2* 
2 Open an ftp session at your PC or workstation by typing one of the following
commands:
ftp
printername ↵ (for example, ftp pctdv6↵)
ftp
ipaddress ↵ (for example, ftp 161.33.128.5↵)
3 When prompted for a user name and password, press Enter for both.
An ftp> prompt displays.
»Note:
If a message displays denoting invalid password, contact your system
administrator. Otherwise, continue.
4 At the ftp> prompt, change to binary mode by typing
bin↵
5 At the ftp> prompt, send the file to the printer by typing
put
filename ↵
where
filename is the name of the test file.
»Note:
A text file is preferable.
The printer’s message window reads 1 Active Job to indicate that the file is
being printed.
However, if you have no text file for this test, you can type in one of the following,
(choose the line applicable to your workstation type):
a For Windows 95/98, type
put c:\autoexec.bat↵
b for Windows NT, type
put c:\winnt\system.ini↵
c For UNIX, type
put /etc/hosts↵
The ftp> prompt returns when the file has finished.