Specifications

*9
***
'&)*#%%&)2* 
PUT SIZE PAPER IN
INPUTBIN BIN
The Operator Control/Chain
Inputbins is set to Off and the
displayed cassette is empty.
Refill it with the specified size
media.
SIZE is the media size
detected by the engine, and
INPUTBIN is the empty
cassette.
Refill the cassette with
the specified size media.
PUT
SIZE PAPER IN ANY BIN Operator Control/Chain
Inputbins is set to On and a
chained cassette is empty.
Refill the cassette with
the specified size media.
REPLACE BELT The OPC belt cartridge need
replacing.
Install a new belt
cartridge.
RESETTING ACCOUNTING The reset accounting operation
is in process.
No action needed.
TEST PRINT A test print page is printing. No action needed.
TONER MISINSTALLED The toner cartridge is not
installed.
Install a toner cartridge.
x TONER EMPTY The x (color) toner cartridge is
empty.
Replace the toner
cartridge.
x TONER LOW The x (color) toner is low. There
is enough toner left to print 330
pages before the printer stops.
Redistribute the toner in
the cartridge, or replace
the cartridge.
TOP COVER OPEN The top cover of the printer is
not fully closed.
Ensure the top cover is
fully closed.
TR UNIT MISINSTALLED The transfer unit is not installed
incorrectly.
Check the transfer unit
installation.
TRANSPORT JAM Media has jammed while
passing through the engine.
Locate and remove the
jam.
WAITING FOR IDLE An active job is in process.
Access to the menu is not
allowed until the job is finished.
Wait until the print job is
finished and the printer
goes idle.
This status message... means... Do this...