Specifications

*9
***

FUSER OIL LOW The oil bottle for the fuser unit is
running low.
If you have a new fuser
oil bottle on hand, you
may want to install it
now. If you don’t, order
one now. A limited
number of copies (about
100) will still print.
However, when the oil
runs out, the printer
stops and the FUSER
OIL EMPTY message
appears.
IDLE The printer is on line, but no jobs
are in process.
No action needed.
INITIALIZING The printer is warming up and
getting ready to go on line.
Wait. No other action
needed.
INNER JAM Media has jammed leaving the
OPC belt cartridge area.
Locate and remove the
jam.
INPUT IDLE
PRINTING
The printer is on line and
printing jobs already in the
queue. No new jobs are arriving
at the communication interfaces.
No action needed.
OUTER JAM Media has jammed between the
print engine and the output tray.
Locate and remove the
jam.
OUTPUT BIN FULL The media has exceeded the
limit (such as over 250 sheets of
20 lb [75 g/m²] bond) in the
output bin.
Remove the media from
the output bin.
MISFEED JAM Media has jammed between the
print engine and the input
cassette.
Locate and remove the
jam.
PRINTING STATUS A status page is printing Wait until after the status
page prints, and the
message clears.
This status message... means... Do this...