Specifications

()#%
%( 
»Note:
A dry cotton cloth is required for this procedure.
1 Turn off and unplug the printer.
2 If you have an EXD, open the
duplexer’s rear cover.
If not, skip to step 3.
3 Pull the latch to release the top cover,
and then open the cover.
»Note:
The illustrations for step 3 and step
4 show the printer without the duplexer.
However, the instructions are the same
for all models.
4 Open the printer’s front cover, release the OPC belt cartridge green lock
levers, and remove the OPC belt cartridge.