Setup guide
63
!"
The QMS
magicolor
330
PPD (a printer description file) is provided
with your printer so you can take advantage of special printer features
while using the LaserWriter driver.
1 If you haven’t already, install a LaserWriter driver.
Refer to your Macintosh documentation or see if there is an
installed LaserWriter driver in the Chooser.
2 If you haven't already, follow the instructions given above in
“Installing Macintosh Utilities” on page 5-4.
3 Open the PSExec
f
folder you created in “Installing Macin-
tosh Utilities” on page 5-4.
4 Open the 4.x PPD’s folder.
5 Select the QMS
magicolor
330
printer description file and
drag it to the Printer Descriptions folder on your Macintosh
hard disk.
6 From the Apple menu, select Chooser.
7 In the Chooser window, select the LaserWriter 8.
x
icon, and
then select the QMS
magicolor
330.
8 Choose the Setup button.
This causes the LaserWriter to query the printer and automati-
cally choose the appropriate PPD.
9 Close the Chooser.
Now, when you go into your application, you can access QMS
printing options by choosing Options or Printer-Specific Options
in your application's Print dialog box.
/ "
If you use any of these applications, install the appropriate printer
description file (PPD and/or PDF) as described below:
1 If you haven't already, follow the instructions given above in
“Installing Macintosh Utilities” on page 5-4 and in “Installing
a QMS magicolor 330 PPD” on page 5-5.