Setup guide
6
6
$
Context[2], and PServer Context[3] menus, enter the name of
the configuration file server, the print server name, and the
print server context.
»Note:
The three PServer Context[x] menus allow you to identify
the name of the NDS configuration file server and the print server
context.
The format for the option is
a File server name
bSpace
c Print server name
d Print server context
For example, if the configuration file server name is QMS-4 and
the printer server name is PRINTSERV2, and the printer server
context is SALES.QMS, you would enter
QMS-4 PRINTSERV2.SALES.QMS
»Note:
Make sure to put a space between the file server name
(QMS-4)
and the print server name
(PRINTSERV2.).
Up to 16 characters can be entered in the Pserver Context[1]
field, and additional 16 characters in Pserver Context[2] field, and
16 characters in the Pserver Context[3] field.
»Note:
If you want to assign more than 14 characters to the file
server name you must use CrownAdmin to enter the name.
2 Reset the CrownNet interface by using the Administration/
Communications/Resident NIC/CrownNet/Common/Soft
Reset menu.
3 You’re now ready to print.
File Server Name Print Server
Name
Print Server
Context
QMS–4 PRINTSERV2 .SALES.QMS