Setup guide
































 

The QMS CrownNet Ethernet interface is a combination of hardware
and host software that allows your printer to be connected to an
Ethernet network that supports the following:
The instructions given in this chapter are the minimum steps needed
to get your printer up and printing. For complete installation informa-
tion refer to the
QMS CrownNet Setup Guide . For information on
configuring the CrownNet interface and using the CrownNet soft-
ware (CrownAdmin, CrownNet Manager, and the CrownNet Print
Monitor for Windows), refer to the
QMS CrownNet System Adminis-
trator’s Guide
.

1 Connecting the printer to the network.
2 Configuring the CrownNet interface.
3 Configuring the network.
4 Installing the QMS CrownNet Print Monitor or a QMS
Network Print Monitor.
Network Connection Protocol
AppleTalk, Macintosh OS EtherTalk
LAN Manager, LAN Server NetBIOS/NetBEUI
NetWare IPX/SPX
TCP/IP TCP/IP
Windows 3.1, Windows 95/98,
Windows NT
TCP/IP, NetBIOS, NetBEUI,
EtherTalk