Setup guide
3 Turn the small lever on the
top of the OPC drum car-
tridge counterclockwise to
the Unlock position.
4 Align the guide with the top
of the printer rail by match-
ing up the small arrows.
Caution: If the guide on the OPC drum cartridge is not aligned
with the top of the rail, the cartridge may be damaged.
5 Push the OPC drum cartridge slowly all the way into the
printer until it clicks.
»Note:
Unless the drum cartridge is inserted all the way, the levers
cannot be turned.
6 Turn the small lever clock-
wise to the Lock
position.
7 Turn the large lever clock-
wise to set the “
” mark on
the cartridge to the Lock
position.
8 Close the front cover.
6d