Setup guide
"
$
Caution:
Oil on this roller will come off on your skin if touched
directly. Shield this roller from dust and toner when removing or
inserting into the fusing unit.
6 Hold the fuser oil roller as
shown in the diagram.
7 Align two colored tabs—one
on the fuser unit, and one
on the fuser oil roller.
8 Carefully lower the fuser
oil roller until it clicks
into place.
9 Slide the fuser unit on the
left side of the printer firmly
back into the printer.
Your printer uses four toner cartridges: black, yellow, magenta,
and cyan.