Setup guide


































This chapter explains how to set up your printer for the first time.
It includes information on finding a good location for the printer,
unpacking and checking the shipment contents, installing consum-
ables (toner cartridges, OPC drum cartridge, and fuser oil roller),
loading the media cassette, turning the printer on, and printing a
startup page.
-./
For a safe and convenient printer operation, consider the following
when determining the installation location:
 Away from cooling and heating sources, extreme temperature or
humidity changes, direct sunlight, excessive dust, corrosive
chemicals or vapors, water pipes, refrigerators, and any strong
electromagnetic field (such as that created by an air conditioner).
»Note:
If the printer is located in a cold room that is rapidly heated,
or if the printer is moved from a cold place to a warm, humid
place, condensation may occur within the printer, degrading print
quality. If this occurs, allow the printer to adapt to the environment
for about one hour before use.
 Away from water.
Also, when used near a humidifier, impurities in the water may be
released into the air, where they can accumulate inside the
printer and cause degraded printer output.
»Note:
So, if using a humidifier or water vaporizer in the room with
the printer, use only purified or distilled water.
 Away from open flames. Away from items that can easily burn.
 Away from items that produce excessive vibration.
 In an area with an ambient temperature range of 41° to 90° F
(5° to 32° C) and relative humidity range of 15% to 85%