Specifications

ACCESSORIES
• 69
ACCESSORIES
`CTs MULTI-CHANNEL AMP ACCESSORIES
VCA-MC4A & VCA-MC8
Remote Level Control
The Crown VCA-MC4A and VCA-MC8 are optional
level-control modules for the Crown CTs multi-
channel power amplifiers. The VCA-MC4A is for the
CTs 4200, and the VCA-MC8 is for the CTs 8200.
A VCA-MC module provides independent remote
level control for each channel. 4-pin removable
Phoenix-style barrier connectors provide the
+10VDC control voltage, ground, and control lines
for two amplifier channels. Thus, the 4-channel
CTs 4200 uses two connectors; the 8-channel CTs
8200 uses four connectors. Crown CTs 4200 and
8200 amplifiers can be supplied with a VCA-MC
module already factory-installed, or your choice of
MC modules can be easily added to the amplifier
by any authorized Crown Service Center.
Choosing the Right Module
To order accessory modules for your amplifier,
please refer to the model tag (located on the back
panel of the amplifier) for your amplifier’s specific
model number. Then refer to the information below
to select the correct accessory for your require-
ments.
CTs 4200: VCA-MC4 or IQ-MC4
CTs 4200A: VCA-MC4A or IQ-MC4A
CTs 8200 or CTs 8200A: VCA-MC8 or IQ-MC8
`FEATURES
• Independent remote level control
for each channel.
• 4-pin removable Phoenix-style barrier
connectors provide the +10VDC control
voltage, ground, and control lines for
two amplifier channels.
• Optional wall-mount level control
panels for use with VCA modules:
1-VCAP and 4-VCAP.
1-VCAP & 4-VCAP
Wall-Mount Controllers
Crown VCAP panels are wall-mounted panels
with potentiometers that provide remote control
of the volume of Crown CTs amplifier channels
via a VCA-MC4 or VCA-MC8 module installed in
the amplifier. Two models are available: 1-VCAP
and 4-VCAP.
1-VCAP: Used in conjunction with a VCA-MC
module, this is a 1-gang panel with one poten-
tiometer that provides remote volume control
for one or more CTs amplifier channels. The
potentiometer on the panel is wired directly
to the VCA connectors on the VCA-MC.
4-VCAP: This is a 2-gang panel with four poten-
tiometers that provide remote volume control
for four or more CTs amplifier channels. The
potentiometers on the panel are wired directly
to the VCA connectors on the VCA-MC.
`FEATURES
• 1-VCAP provides remote volume control
for one or more CTs amplifier channels.
• Fits into a 1-gang electrical box.
• 4-VCAP provides remote volume control
for four or more CTs amplifier channels.
• Fits into a 2-gang electrical box.
CTs Controllers
Regulatory Certifications
For all CTs Multi-Channel Amp Accessories
Cheeseburger in Paradise,
Indianapolis, IN, U.S.A.