Specifications

I Q N E T W O R K
• 65
IQ NETWORK
`IQ ACCESSORIES
T
he IQ-PIP USP2 Adapter allows many older Crown PIP compatible
amplifiers (i.e. Macro-Tech, Com-Tech, and Studio Reference Series) to
access the power and versatility of the Crown IQ-PIP-LITE module.
The USP2 Adapter can be installed into the following amplifier models: CT-
200, CT-400, CT-800, CT-1600, MA-600, MA-1200, MA-2400, MA-3600VZ,
MA-5000VZ, MA-24x6, MA-36x12, Studio Reference I, Studio Reference II.
Qualified service personnel must install the IQ-PIP USP2 Adapter.
Installation procedures may vary depending upon the amplifier model.
Contact your Crown dealer or the Crown Technical Support Group for
details.
IQ-PIP-USP2 Adapter
For Older PIP-Compatible Amplifiers
IQ-MC4 & IQ-MC8
SmartAmp Automation for CTs Multichannel Amplifiers
T
he Crown IQ-MC4 and IQ-MC8 are optional IQ control modules for the
Crown CTs multichannel power amplifiers. The IQ-MC4 is the IQ module
for the CTs 4200, and the IQ-MC8 is the IQ module for the CTs 8200. The
modules require an IQ System with an IQ2-compatible interface.
A single IQ-MC module provides IQ control and monitoring capability to all
channels of the amplifier. Features include basic IQ amplifier control and
monitoring, including attenuation, mute, polarity, input level, output level,
power supply temperature, and thermal level meters. Advanced features
include IOC, Thermal and Fault error reporting, Load Supervision, output
limiting, Listen Bus, AUX control port, 10 presets, and real-time “read-only”
software indication of amplifier hardware indicator, level control, and mode
switch status.
Crown CTs 4200 and 8200 amplifiers can be supplied with an IQ-MC mod-
ule already factory-installed, or your choice of MC modules can be easily
added to the amplifier by any authorized Crown Service Center.
Basic Features
Basic IQ amplifier control and moni-
toring, including:
• Attenuation.
• Mute.
• Polarity.
• Input level.
• Output level.
• Power supply temperature.
• Thermal level.
Advanced Features
• IOC.
• Thermal and Fault error reporting.
• Load Supervision.
• Output limiting.
• Listen Bus.
• AUX control port.
• 10 presets.
• Real-time “read-only” software
indication of amplifier hardware
indicator, level control, and mode
switch status.
• Error reporting for level control or
mode switch position change.
IQ-MC8 module. IQ-MC4 module not shown.
`FEATURES