Specifications

www.crownaudio.com
48 •
AMPLIFIERS
`CINEMA
CTs Series
CTs Multi-Channel
`FEATURES
• High power density: Four-channel model in a 2U chassis,
eight-channel model in a 3U chassis.
• New Crown Switching Power Supply for lighter weight.
• Selectable “Constant-Voltage” or low-impedance (4/8 ohm)
operation per channel-pair.
• 100V direct outputs.
• New “FIT” (Fault Isolation Topology) circuitry isolates fault
conditions without affecting neighboring channels.
• Accept new MC accessory modules.
POWER OUTPUT*
All channel
All channels driven pairs driven
Models
4-ohm Dual 8-ohm Dual 70V Dual 8-ohm Bridge
CTs 4200 260W 200W 220W
†
520W
CTs 8200 200W 160W 200W
†
400W
*
Maximum average power in watts at 1kHz at 0.1% THD.
†Constant Voltage full-bandwidth power ratings support
100 Hz to 20 kHz due to automatic high-pass filters.
POWER OUTPUT*
2-ohm Dual 4-ohm Dual 70V Dual 4-ohm
Models
(per channel) (per channel) (per channel) Bridge
CTs 600 150W** 300W 300W 300W**
CTs 1200 250W** 600W 600W 500W**
CTs 2000 1,000W 1,000W 1,000W 2,000W
CTs 3000 1,500W 1,500W 1,500W 3,000W
*Maximum average power in watts at rated THD, 20 Hz - 20 kHz.
** At 1 kHz.
CTs 2-Channel
`FEATURES
• High power density. All two channel models in a 2U chassis.
• New Crown Switching Power Supply for lighter weight.
• Selectable “Constant-Voltage” or low-impedance operation per channel.
• 100V direct outputs on CTs 2000, CTs 3000.
• Fully PIP2-compatible.
Marunouchi Plaza, Japan.
Note: For more information about
the products featured in this section,
please refer to following pages:
CTs 2-Channel page 4
CTs Multi-channel page 6
CL Series page 10
CE Series page 22
XLS Series page 24
Regulatory Certifications
CTs 600, CTs 1200, CTs 4200, CTs 8200 CL1, CL2, CE 1000, CE 2000TX
CTs Series
CTs, CL, CE and XLS Series
CTs, CL and XLS Series CE Series