Specifications

www.crownaudio.com
34 •
AMPLIFIERS `TOURING
Macro-Tech 02 Series: Advanced Reinforcement
Macro-Tech 602, Macro-Tech 1202, Macro-Tech 2402,
Advanced
`FEATURES
• Enhanced PIP2™ (Programmable Input Processor) connector accepts
new accessory modules that tailor the amplifier for specific applications.
• Balanced XLR and 1/4-inch phone jacks for each channel on the
standard PIP-FXQ module.
• Full Protection from shorted, open and mismatched loads, general
over-heating, DC, high-frequency overloads, and full internal fault
protection are provided by our “Quad-Mute” protection scheme.
• Two mono modes (Bridge-Mono and Parallel-Mono) for driving
a wide range of load impedances.
POWER OUTPUT*
2-ohm Dual 4-ohm Dual 8-ohm Dual 4-ohm 8-ohm 16-ohm
Model
(per channel) (per channel) (per channel) Bridge Bridge Bridge
MA-602 400W 325W 220W 750W 655W 450W
MA-1202 675W 480W 310W 1,300W 970W 620W
MA-2402 1,050W 800W 520W 2,070W 1,585W 1,035W
*Maximum average power in watts at 0.1% THD, 1 kHz.