Specifications

www.crownaudio.com
10 •
AMPLIFIERS
`INSTALLED SOUND
CL Series: High-Power, 2 Ohm Operation
CL1, CL2, CL4
Powerful
`FEATURES
• Low impedance compatibility for applications where high
power, low impedance loads are the primary requirement.
• Rear panel detented level controls allow for accurate level
settings and secure operation.
• “Contractor Correct” barrier strip output connectors allow
for quick and easy connection, regardless of the load.
• Active crossover with signal routing available with optional
System Solution Topology modules.
• Accurate, uncolored sound with very low distortion for
the best in music and voice reproduction.
POWER OUTPUT*
2-ohm Stereo 4-ohm Stereo 8-ohm Stereo 4-ohm 8-ohm
Model (per channel) (per channel) (per channel) Bridge Bridge
CL1 560W 450W 275W 1,100W 900W
CL2 900W 750W 450W 1,950W 1,320W
CL4 1,400W** 1,200W 600W 2,800W** 2,400W
*Maximum average power in watts at 1kHz with 0.05% THD.
**+200V line voltage provides 1,800W (2 ohm stereo) and 3,600W (4 ohm bridge-mono).