Specifications

AMPLIFIERS `INSTALLED SOUND
CH Series: 4/8 Ohm, 70V or 100V per channel
CH1, CH2, CH4
www.crownaudio.com
8•
Versatility
`FEATURES
• Drives multiple impedances, with both low impedance
and high impedance outputs per channel.
• High-pass filter for each channel provides low-frequency
roll off to eliminate step down transformer saturation
when used in 70V distributed systems.
• Rear panel detented level controls allow for accurate
level settings and secure operation.
• “Contractor Correct” barrier strip output connectors allow
for quick and easy connection, regardless of the load.
POWER OUTPUT*
2-ohm Dual 4-ohm Dual 4-ohm Dual 70/100V Dual 8-ohm 140V 200V
Models (per channel) (per channel) (per channel) (per channel) Bridge Bridge Bridge
CH1 —— 450W 275W 300W 900W 600W 600W
CH2 —— 660W 400W 600W 1,320W 1,200W 1,200W
CH4 1,400W 1,200W 600W 1,200W 2,400W 2,400W ——
*Maximum average power in watts at 0.5% THD, 1 kHz.