Specifications

www.crownaudio.com
84
SYSTEM SOLUTIONS — IQ Accessories
The IQ-PIP USP2 Adapter allows many older Crown PIP compatible
amplifiers (i.e. Macro-Tech, Com-Tech, and Studio Reference Series)
to access the power and versatility of the Crown IQ-PIP-LITE module.
The USP2 Adapter can be installed into the following amplifier mod-
els: CT-200, CT-400, CT-800, CT-1600, MA-600, MA-1200, MA-2400,
MA-3600VZ, MA-5000VZ, MA-24x6, MA-36x12, Studio Reference I,
Studio Reference II.
IQ-PIP-USP2 Adapter
For Older PIP-Compatible Amplifiers
Qualified service personnel must install the IQ-PIP USP2 Adapter.
Installation procedures may vary depending upon the amplifier model.
Contact your Crown dealer or the Crown Technical Support Group for
details.
IQ BUS AUX IQ ADDRESS
LISTEN BUS
PRESET
OUT IN
DATA
1 2 4 8 16 32 64 128
IQ-MC4 & IQ-MC8
SmartAmp Automation for CTs Multichannel Amplifiers
The Crown IQ-MC4 and IQ-MC8 are optional IQ control modules for
the Crown CTs multichannel power amplifiers. The IQ-MC4 is the IQ
module for the CTs 4200, and the IQ-MC8 is the IQ module for the
CTs 8200. The modules require an IQ System with an IQ2-compati-
ble interface.
A single IQ-MC module provides IQ control and monitoring capabili-
ty to all channels of the amplifier. Features include basic IQ amplifier
control and monitoring, including attenuation, mute, polarity, input
level, output level, power supply temperature, and thermal level
meters. Advanced features include IOC, Thermal and Fault error
reporting, Load Supervision, output limiting, Listen Bus, AUX control
port, 10 presets, and real-time “read-only” software indication of
amplifier hardware indicator, level control, and mode switch status.
Crown CTs 4200 and 8200 amplifiers can be supplied with an IQ-
MC module already factory-installed, or your choice of MC modules
can be easily added to the amplifier by any authorized Crown
Service Center.
Basic Features
Basic IQ amplifier control and monitoring, including:
• Attenuation.
• Mute.
• Polarity.
• Input level.
• Output level.
• Power supply temperature.
• Thermal level.
Advanced Features
• IOC.
• Thermal and Fault error reporting.
• Load Supervision.
• Output limiting.
• Listen Bus.
• AUX control port.
• 10 presets.
• Real-time “read-only” software indication of amplifier
hardware indicator, level control, and mode switch status.
• Error reporting for level control or mode switch position
change.
IQ-MC8 module. IQ-MC4 module not shown.