Specifications
www.crownaudio.com
80
Features
• Input/Output filters and crossovers
(128 in-box).
• Input signal delay (x16).
• Input gating (x16).
• Full auto leveling (x16).
• Input compressor (x16).
• Adaptive gating (x16).
• 8x8 adjustable mix/matrix.
• Output signal delay (x10) (0 to 2000 mS in
20mS steps).
• Ambient level compensation (x10).
• Output limiter (x10).
• 37-pin multi-function control port.
• True room combining features.
• 32 internal presets.
• 32 scheduler events indicators.
• True universal power supply (UPS)
allowing 100-240 VAC at 50-60 Hz.
• Incorporated single-loop IQ interface.
• Full IQ Network control/monitoring
using IQwic or IQ for Windows soft-
ware.
• Adjustable NOM (Number of Open
Mics) (x16).
• Assignable-function front panel LED .
SYSTEM SOLUTIONS — IQ Rackmount
IQ-USM 810
Processor/Mixer/Router—All In One
The Crown IQ-USM 810 is an 8x10 mixer/processor with unique dual
input processing paths. As an IQ component, it can be controlled by an
IQ Network, and with its distributed intelligence capability, can continue
to operate even when an IQ Network is not connected. The IQ-USM
810 can also act as a system interface to other IQ components.
It features high-quality 24-bit A/D and D/A converters along with 240
MIPS of full 32-bit floating point DSP for optimum dynamic range.
IQ-INT 3
IQ System Interface
T
he IQ-INT 3 is an IQ System
®
interface that connects up to four differ-
ent IQ Bus loops to a host computer. It is a self-contained unit with its
own IQ Bus drivers, RS232 drivers and power supply. It has a micro-
processor that can be directed by the host computer to send and
receive commands and data to and from IQ components connected to
its IQ Bus loops.
The IQ-INT 3 supports both the original IQ and the newer IQ2 proto-
cols. Convenient RJ-45 connectors for IQ Bus input and output make
it easy to make system connections, allowing the use of off-the-shelf
straight through network cables.
Features
• Connects up to four separate IQ Bus loops.
• Blue Power indicators on the front and rear panels.
• Yellow Loop Status indicators on the front and rear panels
show IQ Bus loop data activity.
• RJ-45 connectors for IQ Bus input and output for easy and
secure IQ Bus connections.
• Supports both the original IQ and newer IQ2 protocols.