2012 Full-Line Catalog
Introduction: Corporate Overview Intelligent Power. Unleased. For 60 years, Crown has designed and manufactured professional power amplifiers, microphones and computer-controlled audio components and software with pride and innovation. Crown products are developed for a wide range of uses, from mobile PA systems for musicians and DJs to large installations in stadiums and arenas.
For over 60 years, the Studer name has been synonymous in the world of professional audio with innovation, elegant design and unsurpassed excellence in engineering. Today, Studer is acknowledged as the leader is Digital Mixer Technology and offers the widest range of digital broadcast consoles and system components available from any manufacturer. Harman Pro’s HiQnet® finally enables system components to reach beyond themselves.
Introduction: Contact Information HiQnet hiqnet.harmanpro.com 8760 South Sandy Parkway, Sandy, Utah 84070, USA, Tel: (801) 566-8800, Fax: (801) 568-7662 For other products and distributors worldwide see our website: hiqnet.harmanpro.com AKG Acoustics www.akg.com AKG Acoustics GmbH Lemböckgasse 21-25, A-1230 Vienna/AUSTRIA, Tel: (+43 1) 86 654-0,* www.akg.com, e-mail: sales@akg.com, Hotline: (+43 676) 83200 888, hotline@akg.com AKG Acoustics, U.S. 8400 Balboa Boulevard. Northridge, CA 91329, U.S.A.
Harman Pro Group | 2012 Section: 04 POWERED BY Full Line Catalog|2012 Installed Sound Commercial Audio Portable PA Tour Sound Cinema Sound Page 5
INSTALLED S Crown installed Sound Product Line Harman Pro Group | 2012 Section: 04 ComTech DriveCore™ Series Page 6 CTs 2-Channel Series
D SOUND Harman Pro Group | 2012 Section: 04 CTs Multi-Channel Series CDi Series Page 7
INSTALLED SOUND ComTech DriveCore Series: The CT475, CT875, CT4150, CT8150 New Standard Harman Pro Group | 2012 Section: 04 FLEXIBILITY ` FEATURES • • • • • • High power density: Four/eight-channel models in a 1U chassis DriveCore technology Light weight design Convection (Fan-less) cooled Life safety features Cascading inputs for added flexibility POWER OUTPUT* 8-ohm Dual Models CT 475 CT 875 CT 4150 CT 8150 (per channel) 75W 75W 125W 125W *Average power in watts at rated THD, 20 Hz - 20 kHz.
` SPECIFICATIONS Front Panel Controls and Indicators Ready Indicator: Green LED, one per channel, illuminates when the channel is initialized and ready to produce audio output. Signal Indicator: Green LED, one per channel, illuminates to indicate the presence of analog input signals above –40 dBu. Clip Indicator: Red LED, one per channel, illuminates when the THD of the channel’s output signal rises to a level typically considered as the onset of audible clipping.
INSTALLED SOUND CTs Series: The Standard CTs 600, CTs 1200, CTs 2000, CTs 3000 Harman Pro Group | 2012 Section: 04 FOUNDATION ` FEATURES • • • • High power density.
0W‡ 0W‡ 0W 0W Frequency Response (at 1 watt, 20 Hz - 20 kHz): ±0.25 dB. Signal to Noise Ratio below rated power (20 Hz to 20 kHz): 105 dB A-weighted. Total Harmonic Distortion (THD) at full rated power, from 20 Hz to 20 kHz: CTs 600/1200: < 0.1%. CTs 2000/3000 < 0.35%. Damping Factor: 10 Hz to 100 Hz: > 3000. Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB. Common Mode Rejection (CMR) (20 Hz to 1 kHz): 50 dB. DC Output Offset: < ±2 mV.
INSTALLED SOUND CTs Multi-Channel Series: The CTs 4200, CTs 8200 Standard Harman Pro Group | 2012 Section: 04 FLEXIBILITY ` FEATURES • • • • High power density: Four-channel model in a 2U chassis, eight-channel model in a 3U chassis Crown Switching Power Supply for lighter weight Selectable “Constant-Voltage” or low-impedance (4/8 ohm) operation per channel-pair.
` SPECIFICATIONS Front Panel Controls and Indicators Bridge Mode Indicator: Yellow LED, one per channel pair, illuminates when the channel pair’s Mode Switch is set to the “Bridge” position. If Mode switch is changed while amplifier is powered up, Bridge LED will flash, indicating that the amplifier must be powered off and on to reset the Mode. Ready Indicator: Green LED, one per channel, illuminates when the channel is initialized and ready to produce audio output.
INSTALLED SOUND CTs Multi-Channel Series: With CobraNet CTs 4200USP/CN, CTs 8200USP/CN Harman Pro Group | 2012 Section: 04 COBRANET CAPABLE TM ` FEATURES (with USPCN module) • • • • • • 100 Mbps Ethernet single-plug solution for CobraNet audio, and HiQnet™ control and monitoring Analog audio inputs allow CobraNet network audio input, CobraNet audio backup, or a hardwire emergency override of CobraNet audio 24 bit digital to analog conversion with 32 bit, floating point DSP processing Firmware upgrades
` SPECIFICATIONS USP/CN CobraNet Module Specifications (for amplifier specifications, see the CTs MultiChannel Series pages) Connectors: AUX Connector Configurable for AUX input, AUX output and Listen Bus. Listen Bus is also supported through CobraNet. Network Connector The dual RJ45 CobraNet connectors allow a Primary & Secondary connection to the 100Mb Ethernet network.
INSTALLED SOUND CDi Series: 2/4/8 Ohm, 70V/100V per CDi 1000, CDi 2000, CDi 4000, CDi 6000 channel Harman Pro Group | 2012 Section: 04 VERSATILITY ` FEATURES • • • • • • Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting Computer connectivity via USB allows fast setup and configuration with HiQnet™ Barrier strip outputs, removable Phoenix-style input Extremely versatile, handling a wide range of speaker impedances and outputs Switch-mode universal power suppl
` SPECIFICATIONS Performance Output Power: See power charts. Voltage Gain at 1kHz: CDi 1000: 30.5 dB CDi 2000: 32.9 dB CDi 4000: 34.2 dB CDi 6000: 37.1 dB Frequency Response: +0/–1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms. Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode. Sensitivity: 1.4V. Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 100 dB (A weighted).
COMMERCIAL A Crown Commercial Audio Product Line Harman Pro Group | 2012 Section: 04 Preamplifier-Mixers Page 18 Amplifiers
L AUDIO Harman Pro Group | 2012 Section: 04 Mixer-Amplifiers Page 19
COMMERCIAL AUDIO 14M, 28M Harman Pro Group | 2012 Section: 04 ADAPTABLE ` FEATURES • • • • • • • Page 20 4 or 8 inputs, 1 or 2 output channels Ideal for commercial and industrial use Balanced Phoenix-type mic/line inputs; RCA inputs Balanced Phoenix-type line outputs Any input can be sent to any output Priority muting Independent bass and treble controls for each input Model Inputs System Zones 14M 28M 4 8 Single-zone Two-zone
O ` SPECIFICATIONS Performance Frequency Response (at line out): 20 Hz to 20 kHz +/- 1 dB. Signal to Noise Ratio (master volume at minimum): 100 dB. THD: 0.05% typical with 800 mV balanced input, 1V output. Input Sensitivity (volts RMS for full output at maximum gain): Balanced mic inputs: 3 mV. Balanced line inputs: 800 mV. RCA connectors: 400 mV. Input Impedance (nominal): Mic: 400 ohms. Line: 100 kilohms. RCA: 50 kilohms. Crosstalk (all controls at “10”): –50 dB at 1kHz.
COMMERCIAL AUDIO 180A, 280A, 1160A Harman Pro Group | 2012 Section: 04 POWER ZONE ` FEATURES • • • • Ideal for commercial and industrial use Balanced Phoenix-type line inputs; touch-proofed screw-terminal speaker outputs Advanced protection system includes output current limiting, DC protection, circuit breaker/fuse, and thermal protection 1 or 2 inputs; 1 to 2 amplifier output channels POWER OUTPUT* Models 180A 280A 1160A 4-ohm 70V/100V Inputs System Zones 80W 80W 160W 80W 80W 160W 1 2 1 Sin
O ` SPECIFICATIONS Performance Frequency Reponse (at 1 watt from 4-ohm tap): 70 Hz to 19 kHz +/- 1 dB. Frequency Response (at line out): 20 Hz to 20 kHz +/- 1 dB. Power Bandwidth (at 4-ohm tap, 2 dB below maxium 1 kHz power): 50 Hz to 20 kHz with < 0.5% THD Signal to Noise Ratio (ref. to rated power, master volume at minimum): 85 dB. DC Output Offset: < ±5 mV. THD: Less than 0.5% at rated power at 1 kHz. Input Sensitivity (for full output at maximum gain): 800 mV. Input Impedance (nominal): 100 kilohms.
COMMERCIAL AUDIO 180MA, 280MA, 1160MA Harman Pro Group | 2012 Section: 04 PRACTICAL ` FEATURES • • • • • 4 to 8 inputs, 1 to 2 amplifier output channels Ideal for commercial and industrial use Balanced Phoenix-type mic/line inputs; touch-proofed screw-terminal speaker outputs Any input can be sent to any output Priority muting POWER OUTPUT* Models 180MA 280MA 1160MA 4-ohm 70V/100V Inputs System Zones 80W 80W 160W 80W 80W 160W 4 8 4 Single-zone Two-zone Single-zone *Minimum guaranteed power i
O ` SPECIFICATIONS Performance Frequency Reponse (at 1 watt from 4-ohm tap): 70 Hz to 19 kHz ± 1 dB. Frequency Response (at line out): 20 Hz to 20 kHz ± 1 dB. Power Bandwidth (at 4-ohm tap, 2 dB below maxium 1 kHz power): 50 Hz to 20 kHz with < 0.5% THD Signal to Noise Ratio (ref. to rated power, master volume at minimum): 85 dB. DC Output Offset: < ±5 mV. THD: Less than 0.5% at rated power at 1 kHz. Input Sensitivity (for full output at maximum gain): Balanced mic inputs: 3 mV.
COMMERCIAL AUDIO 135MA, 160MA Harman Pro Group | 2012 Section: 04 PRACTICAL ` FEATURES • • • • • 3 inputs and one 35W amplifier output channel in 135MA 4 inputs and one 60W amplifier output channel in 160MA Ideal for paging, background music, and music-on-hold Voice-activated priority muting (VOX) Pre-amp outputs POWER OUTPUT* Models 8-ohm 70V/100V 135MA 160MA 35W 60W 35W 60W Inputs System Zones 3 4 Single-zone Single-zone *Minimum guaranteed power in watts at 1 kHz with 0.5% THD.
O ` SPECIFICATIONS Performance Frequency Response (at 1 watt from line out): 50 Hz to 20 kHz ± 1 dB. 19 Hz to 34 kHz +0, –3 dB. Input Signal Clip Indicators: Green LED, one above each channel's input attenuator, flashes brightly at threshold of audible distortion. Signal to Noise Ratio (ref. to rated power, master volume at minimum): Output Signal Presence Indicator: Green LED above master output volume control illuminates when any input signal exceeds –40 dBu. Mic: > 58 dB. Line: > 60 dB.
PORTABLE P Crown Portable PA Product Line Harman Pro Group | 2012 Section: 04 XTi 2 Series Page 28
E PA Harman Pro Group | 2012 Section: 04 XLS DriveCore™ Series Page 29
PORTABLEPA XTi 2 Series: World Class XTi 1002, XTi 2002, XTi 4002, XTi 6002 Harman Pro Group | 2012 Section: 04 WORLD CLASS ` FEATURES • • • • Complete system processing solution including XOVER, EQ, Delay, & Limiting NEW Peakx Plus™ Limiters provide the ultimate in performance and protection NEW Advanced Monitoring provides visibility of AC Line Voltage and Power Supply Temperature USB network for real-time monitoring and control POWER OUTPUT Model XTi 1002 XTi 2002 XTi 4002 XTi 6002 2-ohm Dual (per
` SPECIFICATIONS Performance Indicators Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs). –10 Indicator: Green LED flashes when output signal exceeds –10 dB below clip. –20 Indicator: Green LED flashes when output signal level exceeds –20 dB below clip. Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
PORTABLEPA XLS DriveCore™ Series: Performance and XLS1000, XLS1500, XLS2000, XLS2500 Flexibility Harman Pro Group | 2012 Section: 04 INNOVATION ` FEATURES • High Performance, Lightweight Class-D amplifier – weighs less than 11 lbs • Integrated PureBand™ Crossover system ensures seamless transitions from low to high frequency drivers • Integrated PeakX™ Limiters provide maximum output while protecting your speakers • XLR, 1/4", RCA Inputs ensure compatibility with any source • 1/4" Inputs can b
` SPECIFICATIONS Performance Sensitivity (for full rated power at 4 ohms): 1.4 Vrms. Frequency Response (at 1 watt, 20 Hz to 20 kHz): +0 dB, –1 dB. Signal-to-Noise Ratio Rated as dBr to full rated 8 ohms power output (A-weighted): XLS1000: > 97 dB. XLS1500, XLS2000, XLS2500: > 103 dB. Total Harmonic Distortion (THD): < 0.5%. Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to –30 dB: < 0.3%. Damping Factor (8 ohm) 10 Hz to 400 Hz: > 600.
TOUR S Crown Tour Sound Product Line Harman Pro Group | 2012 Section: 04 VRack Page 34 I-Tech HD Series
R SOUND Harman Pro Group | 2012 Section: 04 I-Tech 4x3500HD DriveCore™ Series Macro-Tech i Series Page 35
TOURSOUND VRack Series: Complete Amplification System VRack Harman Pro Group | 2012 ` FEATURES Section: 04 Page 36 • Three IT12000HD amplifiers • Fully assembled package from one source • Worldwide power distribution with both L21-30 and 32A CEE-Form connections • Flexible input panel with Analog, AES, and VDrive • Versatile output panel • Fail-over AES and network connection • Rear rack lighting • VDrive AES digital distribution over CAT5 • Built-in network control • Built-in capt
` CROWN'S VRACK SYSTEM ` VRACK INCLUDES We know you’ve got enough to worry about in preparing your venue for each performance. That’s why the new VRack, designed by Crown for optimum performance and setup simplicity, puts all your amplification needs in one customized, turnkey package, complete with full safety approvals.
TOURSOUND I-Tech HD Series: Excellence Without IT5000HD, IT9000HD, IT12000HD Compromise Harman Pro Group | 2012 Section: 04 RAISING THE BAR–AGAIN ` FEATURES • • • • • • • BSS OMNIDRIVEHD™ DSP processing with IIR and linear phase FIR filters Global Power Supply designed to deliver maximum power no matter where your schedule takes you.
` SPECIFICATIONS Summary Specifications Input Sensitivity (referenced to 8 ohm rated output): Adjustable in 0.1V steps from 1.4V to 7.75V. Signal to Noise Ratio below rated full-bandwidth power, A-weighted: > 112 dB. Required AC Mains: Universal AC input, 100240VAC, 50/60 Hz (±15%). Maximum AC mains voltage 277VAC. Frequency Response (at 1 watt, 20 Hz - 20 kHz): ±0.25dB. Total Harmonic Distortion (THD) at full rated power: < 0.1%.
TOURSOUND I-Tech 4x3500 HD: Excellence DriveCore™ Series Without Compromise Harman Pro Group | 2012 Section: 04 More Flexibility, No Compromise.
` SPECIFICATIONS Summary Specifications The power amplifier shall be a solid-state fourchannel model employing Class I (BCA ® ) output circuitry. The amplifier shall contain protection from shorted, open and mismatched loads, general overheating, DC, high frequency overloads, under/over voltage, and internal faults.
TOURSOUND Macro-Tech i Series: The Macro-Tech i Series Legend Continues Harman Pro Group | 2012 Section: 04 THE LEGEND CONTINUES ` FEATURES • The Macro-Tech® i Series continues the Crown® Macro-Tech legacy of unparalleled sonic accuracy and detail, putting sound quality above all else • Patented, cutting-edge Class-I circuitry gets more power out of an amplifier with less waste • Rugged construction ensures that all Macro-Techs are built to withstand years of abuse on the road • Global Power Supply —
` SPECIFICATIONS Performance Front Panel Controls and Indicators Bridge Mode Indicator: Amber LED illuminates when the amplifier is set to Bridge-Mono mode. Ready Indicator: Green LED, one per channel. On (bright): Ready. On (dim): Onset of compression. Off: Thermal failure. Signal Indicators: One green LED per channel. Solid green: Input signal is above –40 dBu. Bright green: Channel’s output signal has reached the onset of audible clipping.
CINEMA S Crown Cinema Sound Product Line Harman Pro Group | 2012 Section: 04 DSi Series Page 44 DSi-8M
A SOUND Harman Pro Group | 2012 Section: 04 CTs 2-Channel CTs Multi-Channel Page 45
CINEMA SOUND DSi Series: 2/4/8 Ohm DSi 1000, DSi 2000, DSi 4000, DSi 6000 Harman Pro Group | 2012 Section: 04 ONE-TOUCH PERFORMANCE ` FEATURES • • • • • • Intuitive front-panel LCD screen, automatic presets for popular JBL cinema speaker systems for quick, easy configuration Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting Computer connectivity via USB allows fast setup and configuration with HiQnet™ System Architect® software Rear-panel HD-15 connector pro
` SPECIFICATIONS Performance DSi 1000: 6.8A DSi 2000: 8.3A DSi 4000: 10.5A At Idle: Draws no more than 38 watts. DSi 6000: 15.3A At Idle: Draws no more than 180 watts. Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing). DSP Section Input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed. Crossover Filters: Highpass and lowpass per channel.
CINEMA SOUND DSi-8M: Convenient DSi-8M Monitoring Harman Pro Group | 2012 Section: 04 PERFORMANCE MONITOR ` FEATURES • • • • • • Page 48 Compact 2-rack unit 8 channels for monitoring processor or amplifier inputs All inputs and outputs are balanced to interface with new cinema processors No level jumps when switching between processor and amplifiers 25-pin D-sub connectors, plus removable terminal blocks and HD-15 for quick, hassle-free connections Designed to work with bi-amplified sound systems to
` SPECIFICATIONS Performance Input Impedance (processor inputs): 10 kilohms. Input Impedance (Processor Inputs): 10 k ohms. Input Impedance (Power Amplifiers Inputs): > 50 k ohms. Power Requirements: 100-240V , 50-60 Hz, 32 watts. Front Panel Controls and Indicators IEC AC Power Receptacle: Connects to an IEC AC power cord.
CINEMA SOUND CTS 2-CHANNEL ` FEATURES Harman Pro Group | 2012 • • • • • High power density.
CTS MULTI-CHANNEL ` FEATURES • • • • • • High power density: Four-channel model in a 2U chassis, eight-channel model in a 3U chassis New Crown Switching Power Supply for lighter weight Selectable “Constant-Voltage” or low-impedance (4/8 ohm) operation per channel-pair 100V direct outputs New “FIT” (Fault Isolation Topology) circuitry isolates fault conditions without affecting neighboring channels Accept VCA-MC accessory modules POWER OUTPUT* Models CTs 4200 CTs 8200 260W 200W 180W 160W 70V Dual 220W
NETWORKED P & A Crown PIP Modules and Accessories Harman Pro Group | 2012 Section: 04 Page 52
D PRODUCTS & ACCESSORIES Harman Pro Group | 2012 Section: 04 Page 53
TCP / IQ ANALOG AUDIO INPUTS PIP LITE PIP USP3/CN T he Crown PIP LITE is a PIP (Programmable Input Processor) input module for CTs 2 channel amplifiers. The PIP-LITE connects to an audio control network via 100 Mb Ethernet. The audio path in the PIP LITE is processed totally in the analog domain. The SmartAmp™ feature set offers a range of automation functions which provide greater control over amplifier operation and helps to save both time and money.
` FEATURES PIP USP4-CN T he Crown® PIP-USP4 is a 4th generation DSP-based PIPTM (Programmable Input Processor) input module for CTs Series two channel amplifiers. The USP4 connects to an Ethernet network allowing it to be remotely controlled and monitored via HiQnet, System Architect or London Architect. In addition, the USP4 allows the transport of real-time digital audio via AES3 and CobraNetTM. The USP4’s OMNIDRIVEHDTM processor gives the user an enormous amount of digital signal processing.
ACCESSORIES T-170V Constant-Voltage Transformer VCA-MC4A & VCA-MC8 The Crown T-170V is a single autoformer that provides impedance matching between an amplifier output and “constant voltage” loudspeakers. It allows amplifiers without direct 70V or 100V output capability to drive distributed speaker systems designed to operate at those voltages.
ACCESSORIES XFMR-4 & XFMR-8 ` FEATURES • Transformers provide four and eight channels of impedance matching for Constant-Voltage operation • Provides 70V and 100V output when used only with Com-Tech DriveCore (CT 475, CT 875, CT 4150 and CT 8150) • Allows amplifiers without direct Constant-Voltage capability to be easily integrated into distributed systems • “Jumper” cables are provided to easily incorporate the XFMR unit with a Com-Tech DriveCore amplifier Constant-Voltage Transformers Harman Pro
PRODUCT APPLICATIONS CTs 1200 USP4/CN CTs 1200 USP4/CN Harman Pro Group | 2012 CTs 1200 USP4/CN Section: 04 Page 58
Harman Pro Group | 2012 Section: 04 Page 59
PRODUCT APPLICATIONS Harman Pro Group | 2012 Section: 04 Page 60
Crown Amplifier Warranty USA AND CANADA SUMMARY OF WARRANTY Crown International, 1718 West Mishawaka Road, Elkhart, Indiana 46517-4095 U.S.A. warrants to you, the ORIGINAL PURCHASER and ANY SUBSEQUENT OWNER of each NEW Crown product, for a period of three or five (3 or 5) years from the date of purchase by the original purchaser (the “warranty period”) that the new Crown product is free of defects in materials and workmanship.
Crown Amplifier Warranty WORLDWIDE EXCEPT USA & CANADA SUMMARY OF WARRANTY Crown International, 1718 West Mishawaka Road, Elkhart, Indiana 46517-4095 U.S.A.
WHERE SOUND MATTERS www.harmanpro.com hiqnet.harmanpro.com | www.akg.com | www.bssaudio.com | www.crownaudio.com | www.dbxpro.com | www.jblpro.com www.jblselenium.com | www.lexiconpro.com | www.soundcraft.com | www.studer.ch | www.harmaninternational.
