Specifications

International Radio and Electronics Corporation

25166 Leer Drive Elkhart, Indiana 46514 • 574–262–8900 • www.irec1.com

Problem Possible Solutions

3) When trying to get into the

remote control panel, the web

browser closes, or the remote

program does not start.

Java Run Time Environment is not installed or is not

enabled. Install a Java Run Time Environment on the

computer that is being used to connect to the DP3. Sun

Systems JRE 1.4.2 is an example of a program that works

well with many operating systems.

4) The processor doesn’t seem

to have the desired sound.

a) Check the preset that the card is set to. Set it for the

style of program material that is being played.

b) The settings may need to be adjusted to match the

desired sound. This should be done in small steps starting

with the beginning stages first. See ‘Processing setting’

section of ‘ETHERNET Port Guide’ for further

information.

5) No sound is going through

the DP3.

a) If this was a field-install kit, be certain that all the

connectors were seated onto the motherboard when

installed.

b) Check to be certain that the settings are correct for the

DP3. Consult ‘EHTERNET Port Guide’ for further

information.