Specifications

International Radio and Electronics Corporation
25166 Leer Drive Elkhart, Indiana 46514 • 219–262–8900 • www.irec1.com
4
-
11
Within this window, you can adjust the different parameters like Drive, Gate Threshold, Attack, Release, and
Processing drive. The processing drive control is the same control that the ‘processing’ pot on the front panel
display controls. This is the reason that there is a check box below that control to allow the user to over-ride the
front panel control. (NOTE: this control will not have an effect unless the box is checked.) See figure 10a.
The settings are changed by the ‘Click-hold-and-drag’ method over the setting that is desired to be changed
either left or right for lowering or raising the setting. When the setting is being adjusted, the lettering and
reading will change color to Red as shown below in figure 10b and figure 10c.
Figure 10a Figure 10b
Figure 10c
When finished, close the window using the ‘x’ in the upper right hand corner of the window.
Click here to go back to the quick index.