Specifications

International Radio and Electronics Corporation
25166 Leer Drive Elkhart, Indiana 46514 • 219–262–8900 • www.irec1.com
4
-
9
4.2.8 For setting the IP address, go to the ‘Configuration’ selection on the blue bar as
shown in Figure 8.
<<CAUTION>> Once an IP address is changed, you must restart the web browser and enter the new setting.
The change takes place immediately.
You can either close the web browser to exit or select ‘Logout’ to start another session. Remember, the
computer you are using to connect with needs to have the same first three identifier numbers as what you just
changed the card to before it will connect to the card.
You can be connected to the same DP3 with up to 4 computers. Additionally, 1 computer can be connected to
multiple DP3 units, as many as the computer’s processor will handle.
Figure 8
Click here to go back to the quick index.