Specifications

International Radio and Electronics Corporation
25166 Leer Drive Elkhart, Indiana 46514 • 219–262–8900 • www.irec1.com
4
-
8
4.2.7 For the stereo encoder settings, select the ‘Encoding’ tab as shown in Figure 7.
The settings are changed by the ‘Click-hold-and-drag’ method over the setting that is desired to be changed
either left or right for lowering or raising the setting.
Pilot phase can be adjusted to improve stereo separation but should only be adjusted with a calibrated stereo
modulation monitor.
Figure 7
Click here to go back to the quick index.