Specifications

International Radio and Electronics Corporation
25166 Leer Drive Elkhart, Indiana 46514 • 219–262–8900 • www.irec1.com
4
-
7
4.2.6 To select input/output functions, select the ‘In / Out’ tab as shown in Figure 6.
The settings are changed by the ‘Click-hold-and-drag’ method over the setting that is desired to be changed
either left or right for lowering or raising the setting.
To change the settings without adjustment capability, just click on the setting desired in the white circle.
For stereo/mono operation, you must click on the ‘override front-panel’ box before the unit will change. The
unit default is override off.
The selection ‘Phase Rot’ is to invert the phase 180 degrees. This is used normally with program material that
has a mono source and usually voice. This feature helps intelligibility in the program material.
Figure 6
Click here to go back to the quick index.