Specifications

International Radio and Electronics Corporation
25166 Leer Drive Elkhart, Indiana 46514 • 574–262–8900 • www.irec1.com
iv
WARNING -- This equipment generates, uses, and can radiate radio frequency
energy. If not installed and used in accordance with the instructions in this manual
it may cause interference to radio communications. It has been tested and found to
comply with the limits for a Class A computing device (pursuant to subpart J of
Part 15 FCC Rules), designed to provide reasonable protection against such
interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference, at which case, the
user, at his own expense, will be required to take whatever measures may be
required to correct the interference.
CANADA WARNING – This digital apparatus does not exceed the Class A
limits for radio noise emissions set out in the Radio Interference Regulations of
the Canadian Department of Communications. Le present appareil numerique
n'emet pas de bruits radioelectriques depassant les limits applicables aux
brouillage radioelectrique edicte par le ministere des Communications de Canada.
NOTICES
All versions, claims of compatibility, trademarks, etc. of hardware and software
products not made by Crown Broadcast, but mentioned in this manual or other
accompanying material, are informational only. Crown Broadcast makes no
endorsement of any particular product for any purpose, nor claims any
responsibility for its operation or the accuracy of the presentation.
Trademarks
Crown Broadcast, and the Crown Broadcast mark are trademarks of International
Radio and Electronics, Inc. (IREC). All other trademarks mentioned in this
manual are the property of their respective holders.
Copyright
Copyright © 2005-IREC. All rights reserved. Published by IREC, who reserves
the right to make improvements or changes to the products described herein
(which may affect the product specifications) and to revise this manual as
required without notice.
Repair Procedures
You must contact Crown Broadcast for a Return Authorization number before
returning any products. Packages without proper authorization may be refused.
Write the RA number on the shipping label side of the returned package. Be sure
to adequately insure your shipment. Customers in North America can contact
Crown Broadcast customer support at [phone]. All other customers
should contact their local dealer to verify the problem and then contact Crown
Broadcast Customer Service to arrange for repair.