Specifications

International Radio and Electronics Corporation
25166 Leer Drive Elkhart, Indiana 46514 • 219–262–8900 • www.irec1.com
4
-
5
4.2.4 This displays several metering functions as shown in Figure 4.
4.2.4.1 Peak input levels to the card. These should be near –12 for best operation.
4.2.4.2 Peak output levels to the rear panel monitor jacks. Set these for the desired level.
4.2.4.3 Wideband AGC. A meter which shows the overall wideband AGC level.
4.2.4.4 Low band, Mid band, and High band Limiter's. Meters which show the limiter action.
4.2.4.5 Composite level meter. A meter which shows the Composite level (in digital form before the D to A).
4.2.4.6 The presets are located in the first tab (starts this way by default).
• Click once on the preset desired in the window and then click once on ‘select’ to change it.
• Once changes are made, click on ‘save current as…’ and select any one of the ‘user pre-set’ selections.
The named presets cannot be changed. These are factory presets and are locked out.
• For details click here.
Figure 4
Click here to go back to the quick index.