Specifications
International Radio and Electronics Corporation
25166 Leer Drive Elkhart, Indiana 46514 • 574–262–8900 • www.irec1.com
3
-
10
3.11 Crown/Omnia DP3 processor function list
The following section describes the Crown/Omnia DP3 processor function list and the
adjustments possible with each menu using the FMX front panel as the means to do so.
3.11.1 Accessing the main list
From the main list, select [Settings] then [Secondary] then [Omnia board].
This menu is divided up into three main sub-menus.
[Format Preset] When selecting this menu, scroll to the desired format preset that is
programmed into the unit and enter by pressing the knob. Select [Back] if no change is
desired.
Available presets are :
[A-C] Adult contemporary – Somewhat light processing accentuating mid and
high frequencies keeping the loudness at a pleasing level
[CHR] Contemporary Hit Radio – Aggressive processing focusing on good
overall crispness and a general higher level of loudness
[Classical] Classical – Very little processing at all helping to maintain dynamic
range
[Country] Country – Middle of the road processing focusing on clean mid range
frequencies yet keeping a good level of loudness
[Cranked] Loud – Very aggressive processing focused on maximum loudness
[Jazz] Smooth – Processing which maintains smoothness throughout the
frequency ranges
[News/Talk] Plain – Very little processing which is used for speech type of
program material
[Rock] Default – A good overall aggressive processor setting boosting low and
high frequencies while keeping a good overall loudness level
[Urban] Low End Punch – Aggressive processing and boosting of low
frequencies
[Proof of Perf] Proof of Performance – Used at the factory for tone
measurements
[User 1 – User 5] User presets – Programmed from ETHERNET port, default
setting is Rock.
[Processing] This sets the amount of processing of the ‘wide-band AGC’ drive at the
beginning of the processing chain. To select this setting, press the knob and dial the level
desired between –6dB and +6 dB in 0.5 dB increments.










