Specifications

International Radio and Electronics Corporation

25166 Leer Drive Elkhart, Indiana 46514 • 574–262–8900 • www.irec1.com

[FWD Pwr Tweak] Adjust forward power reading to correspond to a reading on a

calibrated wattmeter. Adjustment range is 90 - 110 %.

[REV Pwr Tweak] Adjust reverse power reading to correspond to a reading on a

calibrated wattmeter. Adjustment range is 90 - 110 %.

[CPU Reset] Used to test the ability for the CPU to reset.

[ABC Override] Use to set RF power level for initial power up. Default setting is 80%

of rated power of unit.

[Back] Returns to the previous menu.

[Secondary]

[Date/Time] Settings for the real-time clock.

[New Password] Change the Settings password.

[Omnia Board] Use this menu to access the Crown/Omnia DP3 processor functions. See

section 3.11.

[FSK] Use this menu to enter the FSK code for the translator.

[RMS Board] Selects between ON/OFF for the RMS option.

[RMS Menu] Enter phone numbers that the RMS will call in the event of a failure.

[Factory Reset] Returns user settings to factory settings.

[Back] Returns to previous menu.

3.7 Factory Setting Functions

Factory settings are programmed by the manufacturer and are provided only to authorized

personnel.